Fuel Delivery Systems
Fuel Safe Systems provides the highest quality fuel delivery systems available for auto racing and performance vehicle applications. Let our knowledgeable staff help line your your fuel system with our large selection of fuel pumps, fuel pressure regulators, fuel filters, fuel level sensors, vent check valves, discriminator valves, and much more. Fuel Safe offers fuel system components for all types of fuel from pump gas, E85, diesel, methanol, and all types of racing fuels blends. Get the very best in the racing industry from top brands such as Aeromotive, AEM electronics, Bosch , Deatschwerks, Holley Performance, Radium Engineering, Ti Automotive, and Weldon Pump. For help setting up your fuel system, contact our sales team.
-
$117.00 -
$117.00 -
$107.00 -
Roll Over Valve, ITVV06LMK
Valve, In-Tank Vent Check -6, 90° w/ Plate, Gasket, & Bolt Kit Learn More$192.50 -
TPV6, in-line pressure relief vent valve
In-line tank pressure relief vent valve. -6 AN fittings -red annodized aluminum -overall length, 3.5". -Negative Pressure Limit 0.0055 bar (0.08 psi) -Positive Pressure Limit 0.05 bar (0.725 psi) Learn More$191.00 -
In Tank Return Valve, ITRV10HP
-10 high performance in-tank rollover / return check valve Learn More$126.00 -
Dry Break Quick Disconnect fitting 20-0251
-8 AN dry break style quick disconnect fittings. Supplied as a set, these fittings are true dry break style quick disconnects that allow for rapid engine and fuel system change overs. Made from high quality billet aluminum and annodized red for long life. Good for both gasoline and alcohol fuel systems. Mfg.Part #20-0251 Replaces Part # QDS08 Learn More$125.00 -
TPV8, in-line pressure relief vent valve
In-line tank pressure relief vent valve. Specifications: -Outside Diameter A 1.22" -Middle Body Length B 1.57" -Overall Length C 3.11" -8 mm hose barb fitting -red annodized aluminum -Negative Pressure Limit 0.0055 bar (0.08 psi) -Positive Pressure Limit 0.05 bar (0.725 psi) Learn More$191.00 -
In line tank vent valve, TRL7
In line tank vent valve with rollover protection for use in all motorsports vehicles. Must be installed in a vertical position. Specifications Outside Diameter A 22.0 mm Middle Body Length B 39.2 mm Overall Length C 62.5 mm Thread Not Applicable Standpipe 7.0 mm Internal Thread 9/16" x 18 UNF Weight 28.0g Material Aluminum Alloy 6082 Finish Anodized Red Flow Capacity 0.66 liter/second Learn More$191.00 -
In-line check valve for Bosch FP044, ILPCV08
Billet aluminum in-line check valve for Bosch FP044 pump. Threads directly onto pump outlet and -8 male AN fitting on outlet side. 2-3 PSI cracking pressure. Good for use in gasoline or methanol applications. Learn More$181.00