Fuel Cell Fittings
As a leading designer and manufacturer of fuel cell technologies, Fuel Safe provides the highest quality fuel cell fittings for all of our fuel cell products. We offer fuel cell fittings, fill plates, fill valves, vent check valves, dry break parts, and much more. Fuel Safe fittings are perfect for racing applications and other high-intensity uses. Our fuel cell parts have been used for a wide variety of purposes, including NASCAR. Order your fuel cell fittings from Fuel Safe!
-
$117.00 -
$117.00 -
$107.00 -
Roll Over Valve, ITVV06LMK
Valve, In-Tank Vent Check -6, 90° w/ Plate, Gasket, & Bolt Kit Learn More$175.00 -
TPV6, in-line pressure relief vent valve
In-line tank pressure relief vent valve. -6 AN fittings -red annodized aluminum -overall length, 3.5". -Negative Pressure Limit 0.0055 bar (0.08 psi) -Positive Pressure Limit 0.05 bar (0.725 psi) Learn More$191.00 -
In Tank Return Valve, ITRV10HP
-10 high performance in-tank rollover / return check valve Learn More$126.00 -
Dry Break Quick Disconnect fitting 20-0251
-8 AN dry break style quick disconnect fittings. Supplied as a set, these fittings are true dry break style quick disconnects that allow for rapid engine and fuel system change overs. Made from high quality billet aluminum and annodized red for long life. Good for both gasoline and alcohol fuel systems. Mfg.Part #20-0251 Replaces Part # QDS08 Learn More$125.00 -
TPV8, in-line pressure relief vent valve
In-line tank pressure relief vent valve. Specifications: -Outside Diameter A 1.22" -Middle Body Length B 1.57" -Overall Length C 3.11" -8 mm hose barb fitting -red annodized aluminum -Negative Pressure Limit 0.0055 bar (0.08 psi) -Positive Pressure Limit 0.05 bar (0.725 psi) Learn More$191.00 -
In line tank vent valve, TRL7
In line tank vent valve with rollover protection for use in all motorsports vehicles. Must be installed in a vertical position. Specifications Outside Diameter A 22.0 mm Middle Body Length B 39.2 mm Overall Length C 62.5 mm Thread Not Applicable Standpipe 7.0 mm Internal Thread 9/16" x 18 UNF Weight 28.0g Material Aluminum Alloy 6082 Finish Anodized Red Flow Capacity 0.66 liter/second Learn More$191.00 -
In-line check valve for Bosch FP044, ILPCV08
Billet aluminum in-line check valve for Bosch FP044 pump. Threads directly onto pump outlet and -8 male AN fitting on outlet side. 2-3 PSI cracking pressure. Good for use in gasoline or methanol applications. Learn More$181.00