Fuel filters and vent filters
-
Fuel filter, Synthetic Mesh Fabric, Vertical Screen for FPLP
Learn More
-
-High-flow, 10-micron fabric (fine) replaceable element
-Flows 2,000 lb/hr with a pressure drop of less than 1 PSI
-Compact size: 5.5' long x 2' diameter
-ORB-10 ports. Fittings available to adapt these filters to AN-10, -08 and -06 line sizes
-All filter assemblies feature an O-ring for positive sealing in high-pressure applications
-CNC-machined from 6061-T6 aircraft aluminum
-Bright dip Black anodized finish for a corrosion resistant, show car quality appearance
These Aeromotive in-line fuel filters are a great solution to protect your investment. This is because proper filtration is vital to fuel system performance. Specialty designed filter solutions are needed to achieve protection with minimal limitations. For 200 - 3,000 plus HP applications, our fuel filters offer matchless flow, easy installation, and maintenance. Each is engineered with impeccable machining and finish you've come to expect from all Aeromotive components.
Learn More
-
-High-flow, 100-micron stainless steel (coarse) cleanable element. Flows 2,000 lb/hr with a pressure drop of less than .15 PSI.
-ORB-12 ports. Fittings available to adapt these filters to AN-12, -10 line sizes.
-Pro-Series filters feature an indestructible electroless nickel finish.
-7' long x 2.5' diameter
An inexpensive insurance policy to protect your investment, proper filtration is key to fuel system performance. Engineered filter solutions are required to achieve protection with minimum restriction. For 200 - 3,000 plus HP applications, our filter assemblies offer unmatched flow, ease of installation and maintenance, along with the impeccable machining and finish you've come to expect from all Aeromotive components.
Learn More
-
-High-flow, 100-micron stainless steel (coarse) cleanable element
-Flows 2,000 lb/hr with a pressure drop of less than 1 PSI
- Compact size: 5.5' long x 2' diameter
-ORB-10 ports. Fittings available to adapt these filters to AN-10, -08 and -06 line sizes
-All filter assemblies feature an O-ring for positive sealing in high pressure applications
-CNC-machined from 6061-T6 aircraft aluminum
-Bright dip red anodized finish for a corrosion resistant, show car quality appearance
-Aeromotive Part No. 12304
Learn More
-
-High-flow, 100-micron stainless steel (coarse) cleanable element
-Flows 2,000 lb/hr with a pressure drop of less than 1 PSI
-Compact size: 5.5' long x 2' diameter
-ORB-10 ports. Fittings available to adapt these filters to AN-10, -08 and -06 line sizes. (see Fittings & Adapters)
-All filter assemblies feature an O-ring for positive sealing in high pressure applications
-CNC-machined from 6061-T6 aircraft aluminum
-Bright dip black anodized finish for a corrosion resistant, show car quality appearance
Learn More
-
-Designed to stand up to the destructive properties of alcohol based fuels, including ethanol and methanol
-High-flow, 40-micron stainless steel, cleanable element
-ORB-10 ports. Fittings available to adapt these filters to AN-10, -08 and -06 line sizes
-Compact size: 5.5' long x 2' diameter
-Features an anodized bright dip red finish for a corrosion resistant, show car quality appearance
Learn More
-
Push on Fuel Cell Air Vent Filters (1/2")
Learn More
-
Push on Fuel Cell Air Vent Filters (3/8")
-Male
Learn More
-
-10 Micron element
-Element fits FF-12301 & FF-12321
Commonly the most overlooked component in a fuel system, filter neglect can be the most costly. If not cleaned or replaced regularly, filter elements can become clogged resulting in reduced fuel flow, engine performance and ultimately, fuel pump or even worse, engine damage. By simply replacing and/or cleaning your filter elements regularly, you can avoid costly repairs to your fuel system and ensure peak engine performance. Aeromotive recommends annual inspection and service of filter elements. This includes replacing 10-micron fabric elements and cleaning or replacing 100-micron stainless steel elements. Severe duty applications or newly installed systems may require more frequent maintenance.
Learn More
-
The High Flow, -10 vent valve assembly allows for system venting while preventing any debris from entering your fuel cell. The Flow Vent Valve, ITVV10AFC vent is equipped with internal spring loaded rollover protection to prevent fuel spillage. To keep your vent clean this vent valve features an integrated air filter to keep your fuel system running smoothly. This combination is ideal for dirt racing, desert racing, or any application where you may run the risk of particle debris entering your fuel system.
Learn More