COVID-19 UPDATE – Fuel Safe Systems remains open, taking orders, manufacturing, and shipping product.
800-433-6524 Free Shipping on Online Orders Over $250

section

Fuel Surge Tank Collector

Fuel starvation is a major concern within a fuel system, and one of the most common issues. One of the simplest and most effective solutions to fuel starvation is the addition of a collector or surge tank to your fuel system. Collectors, often times called a slosh box, are installed inside the fuel cell and designed to trap fuel near the fuel pickup line for to prevent air from entering your fuel system. Surge tanks are another option to prevent fuel starvation and can be mounted internal or external from the fuel tank or fuel cell. These systems use a lift pump to fill a resevoir which is not effected by aceclleration, braking, or hard corning.  Fuel Surge tanks deliver consistent fuel and allow you to scavenge fuel until your fuel tank is essencially empty. 

Some fuel tanks and fuel cells can begin seeing signs of fuel starvation at 1/4 to 1/2 a tank. If this is the case for you, a collector or surge tank would be a perfect solution to help mitigate fuel starvation.  Contact our sales team to help diagnose your fuel starvation issues.

Grid  List 

2 Item(s)

per page
  • Trap door check valve

    Check Valve, TD150-OR

    1.5" Machined Aluminum Trap Door with O-ring seal. This trap door check valve was designed for ultra demanding world of NASCAR and is simply the best check valve available. The O-ring seal provides a positive seal and allows a surge tank or baffling system to function at its peak. All TD150-OR's include our proprietary fuel guide ramp that increases the functional footprint of the trap door and allows it to scavenge more fuel into the collector or surge tank. Learn More
    $164.00

  • Holley Hydramat Square 15"x15" and 8"x8"

    Holley HydraMat® - Fuel wicking mat

    Holley HydraMat offer fuel starvation protection and greatly reduce the potential for air to enter into a fuel system. With a wide assortment of sizes and footprints, HydraMats can fit virtually any cell! Since the area of the HydraMat is uncovered, tiny pores in the media seal off through surface tension, forcing fuel to be drawn from other areas of the mat where fuel continues to be available. A HydraMat also acts as a 15 micron pre-filter eliminating the need for a separate filter before the fuel pump.

    • Patent pending design that solves the problems associated with traditional fuel pick-ups in stock fuel tanks as well as racing fuel cells
    • Perfect for vehicles experiencing fuel starvation during hard cornering, acceleration, stopping, inclines, and low fuel conditions
    • Surface tension and fluid wicking allow the HydraMat to continue to draw fuel from the tank or cell even when part of the mat uncovered
    • Unique internal reservoir assists in keeping fuel available at the pickup even under extreme fuel slosh conditions
    • Eliminates the need for specialty reservoirs, sumps and pick up pumps saving cost and greatly reducing complexity
    • Can be folded and compressed for easy installation through a variety of fuel cell openings
    • Works with Alcohol, Ethanol, Methanol, and E-85 fuels, and 2-cycle oil blends as high as 20:1

    Not for use with most oils (see previous point for exceptions). Not for use with diesel fuels. Learn More

    $139.95

Grid  List 

2 Item(s)

per page