Fuel Safe Fuel Cells and Racing Products
800-433-6524 Free Shipping on Online Orders Over $100

section

Fuel Surge Tank Collector

Fuel starvation is a major concern within a fuel system, and one of the most common issues. One of the simplest and most effective solutions to fuel starvation is the addition of a collector or surge tank to your fuel system. Collectors, often times called a slosh box, are installed inside the fuel cell and designed to trap fuel near the fuel pickup line for to prevent air from entering your fuel system. Surge tanks are another option to prevent fuel starvation and can be mounted internal or external from the fuel tank or fuel cell. These systems use a lift pump to fill a resevoir which is not effected by aceclleration, braking, or hard corning.  Fuel Surge tanks deliver consistent fuel and allow you to scavenge fuel until your fuel tank is essencially empty. 

Some fuel tanks and fuel cells can begin seeing signs of fuel starvation at 1/4 to 1/2 a tank. If this is the case for you, a collector or surge tank would be a perfect solution to help mitigate fuel starvation.  Contact our sales team to help diagnose your fuel starvation issues.

Grid  List 

Items 1 to 10 of 21 total

Page:
  1. 1
  2. 2
  3. 3
per page
  • Top, Radium, FCST, Fuel Cell Surge Tank

    FCST, Radium Engineering Fuel Cell Surge Tank

    Radium Engineering's Fuel Cell Surge Tank (FCST) is a fill plate replacement for popular fuel cells. The FCST is designed for EFI vehicles experiencing fuel pump starvation issues while using a competition fuel cell. The FCST is NOT a glorified trap door box. It is the first of its kind to feature a true dual-chamber fuel tank utilizing a single lift pump and up to three surge tank pumps, all in a compact drop-in package. Learn More
    $749.95

  • Holley Hydramat Square 15"x15" and 8"x8"

    Holley HydraMat® - Fuel wicking mat

    Holley HydraMat offer fuel starvation protection and greatly reduce the potential for air to enter into a fuel system. With a wide assortment of sizes and footprints, HydraMats can fit virtually any cell! Since the area of the HydraMat is uncovered, tiny pores in the media seal off through surface tension, forcing fuel to be drawn from other areas of the mat where fuel continues to be available. A HydraMat also acts as a 15 micron pre-filter eliminating the need for a separate filter before the fuel pump.

    • Patent pending design that solves the problems associated with traditional fuel pick-ups in stock fuel tanks as well as racing fuel cells
    • Perfect for vehicles experiencing fuel starvation during hard cornering, acceleration, stopping, inclines, and low fuel conditions
    • Surface tension and fluid wicking allow the HydraMat to continue to draw fuel from the tank or cell even when part of the mat uncovered
    • Unique internal reservoir assists in keeping fuel available at the pickup even under extreme fuel slosh conditions
    • Eliminates the need for specialty reservoirs, sumps and pick up pumps saving cost and greatly reducing complexity
    • Can be folded and compressed for easy installation through a variety of fuel cell openings
    • Works with Alcohol, Ethanol, Methanol, and E-85 fuels, and 2-cycle oil blends as high as 20:1

    Not for use with most oils (see previous point for exceptions). Not for use with diesel fuels. Learn More

    $139.95

  • Fuel Safe's Swirl Pot, SPE

    Fuel Safe Swirl Pot, SPE

    Fuel Safe has designed a de-aerating Swirl Pot/ Collector (part number SPE, optional mounting bracket 1MTL0) that insures an uninterrupted and continuous supply of fuel to the engine. Our Swirl Pot incorporates a swirl inducing geometry along with internal baffle to insure a clean fully De-aerated fuel stream for your fueling system. The pot is TIG welded aircraft grade aluminum and fully anodized with four(4) -8 AN fittings: two (2) for incoming fuel, one fuel outlet and one fuel overflow fitting that evacuates the air while routing excess fuel back to your Fuel Safe Racing Cell. Fuel Safe's Swirl Pot was designed to hold 1 liter of fuel. The flap topped swirl pot insures trapped air returns to the cell and not your engine. An optional addition to the Swirl Pot is an anodized aluminum mounting bracket that allows the Pot to be mounted on any vertical surface. The pot can also be mounted to any horizontal surface via the four (4) integrated mounting tabs located on the bottom plate. This addition is ideal in all forms of racing including drift, time attack and rally cross. Fuel Safe's Swirl Pot ensures your engine will perform under the most extreme conditions! Learn More
    $312.00

  • Surge Tank, with 3 Machined Aluminum Door

    Collector, ST100-T

    Surge Tank, with 3 Machined Aluminum Door Learn More
    $611.00

  • Surge Tank, Specify -6, -8 or -10 Fitting, with 3 Machined Aluminum Doors

    Collector, ST100A-T

    Surge Tank, Specify -6, -8 or -10 Fitting, with 3 Machined Aluminum Doors Learn More
    $644.00

  • Surge Tank with High Pressure Pump and Wire Harness.

    Collector, ST100-HP

    Surge Tank with High Pressure Pump and Wire Harness. Available with either Aeromotive Stealth or Walboro pumps Learn More
    $777.00

  • High performance road race style surge tank.  Comes completely assembled with the following components:

    Collector with Bosch 044 pump, ST100-HPB

    High performance road race style surge tank. Comes completely assembled with the following components: • ST100 road race style collector • Bosch FP044 fuel pump with filter sock • 3 high performance CV100 check valves • WH04M2-NC male wire harness • WH0F2 female wire harness Learn More
    $776.00

  • 1.5" plastic trap door style check valve.

    Check Valve, TD150P

    1.5" plastic trap door style check valve. These are a low cost alternative to our billet aluminum TD150 and TD150-OR models. Learn More
    $49.00

  • High performance road race style surge tank.  Comes completely assembled with the following components:

    Collector with Bosch 044 pump, ST100-HPB-T

    High performance road race style surge tank. Comes completely assembled with the following components: • ST100 road race style collector (6"L X 6"W X 4"H) • Bosch FP044 fuel pump with filter sock • (3) TD150-P Polymer trap doors • WH04M2-NC male wire harness • WH0F2 female wire harness Learn More
    $958.00

  • Road race style surge tank with 3 CV100 high performance check valves.  This collector is designed to optimize fuel pickup and allow you to run your fuel tank down to the last drops of fuel before having to stop for refueling.

    Half gallon collector - ST100

    Road race style surge tank with 3 CV100 high performance check valves. This collector is designed to optimize fuel pickup and allow you to run your fuel tank down to the last drops of fuel before having to stop for refueling. Available with option to accommodate -6 AN, -8 AN, and -10 AN pickup hoses Learn More
    $219.00

Grid  List 

Items 1 to 10 of 21 total

Page:
  1. 1
  2. 2
  3. 3
per page