Fuel Safe Fuel Cells and Racing Products
800-433-6524 Free Shipping on Online Orders Over $100

section

Model Specific Fuel Cells

Model Specific Fuel Cells

Fuel Safe offers racing fuel cell solution for some of the most popular cars on the road and track.  Mustang, Camaro, Corvette, Viper, Shelby, Lotus, Porche and many more popular makes and models.  If we don’t have what you need, we can make it. Our custom fuel cells are the highest quality in the industry with unmatched safety, performance and aesthectics. We are the go to for quality customs fuel cells.

 

Shop for Model Specific Fuel Cells

Grid  List 

2 Item(s)

per page
  • Fuel Safe's Corvette Pro Cell bladder

    Corvette Fuel Cell, SA107A

    Fuel Safe's Corvette Pro Cell bladder is designed to fit perfectly into your factory tank. Stock mounting hardware is used to simplify re-installation. The cell comes complete with an FIA-FT3 approved Pro Cell bladder and an SF6X10E fill plate that includes a -8 pickup, a -8 vent with rollover protection and a -8 return fitting. A sending unit can be added to the cell to provide fuel level information to the driver.

    *PLEASE NOTE: This cell requires that you send in your factory can for bladder installation.

    Learn More
    $3,262.00

  • Holley Hydramat Square 15"x15" and 8"x8"

    Holley HydraMat® - Fuel wicking mat

    Holley HydraMat offer fuel starvation protection and greatly reduce the potential for air to enter into a fuel system. With a wide assortment of sizes and footprints, HydraMats can fit virtually any cell! Since the area of the HydraMat is uncovered, tiny pores in the media seal off through surface tension, forcing fuel to be drawn from other areas of the mat where fuel continues to be available. A HydraMat also acts as a 15 micron pre-filter eliminating the need for a separate filter before the fuel pump.

    • Patent pending design that solves the problems associated with traditional fuel pick-ups in stock fuel tanks as well as racing fuel cells
    • Perfect for vehicles experiencing fuel starvation during hard cornering, acceleration, stopping, inclines, and low fuel conditions
    • Surface tension and fluid wicking allow the HydraMat to continue to draw fuel from the tank or cell even when part of the mat uncovered
    • Unique internal reservoir assists in keeping fuel available at the pickup even under extreme fuel slosh conditions
    • Eliminates the need for specialty reservoirs, sumps and pick up pumps saving cost and greatly reducing complexity
    • Can be folded and compressed for easy installation through a variety of fuel cell openings
    • Works with Alcohol, Ethanol, Methanol, and E-85 fuels, and 2-cycle oil blends as high as 20:1

    Not for use with most oils (see previous point for exceptions). Not for use with diesel fuels. Learn More

    $139.95

Grid  List 

2 Item(s)

per page