COVID-19 UPDATE – Fuel Safe Systems remains open, taking orders, manufacturing, and shipping product.
800-433-6524 Free Shipping on Online Orders Over $250


Corvette Fuel Cells

Corvette Fuel Cells

Fuel Safe®'s Corvette racing fuel cell is the pefect fit for your factory-installed tank. The overall design of our Corvette fuel cell is intended to maximize performance, add safety, and simplify installation. No special hardware is needed because the fuel cell uses stock Corvette hardware to mount. The Corvette fuel cell bladder tank includes an FIA-FT3 approved Pro Cell® bladder and an SF6X10E fill plate. Look no further for the perfect match for your Corvette's fueling needs. 

Each Corvette racing fuel cell includes:

  • TIG welded aluminum container
  • FIA-FT3 Pro Cell® fuel bladder
  • SF6X10E fill plate
  • Full safety foam baffling, minimizes fuel slosh and the potential for an explosion
  • 5 year warranty

Grid  List 

2 Item(s)

per page
  • Holley Hydramat Square 15"x15" and 8"x8"

    Holley HydraMat® - Fuel wicking mat

    Holley HydraMat offer fuel starvation protection and greatly reduce the potential for air to enter into a fuel system. With a wide assortment of sizes and footprints, HydraMats can fit virtually any cell! Since the area of the HydraMat is uncovered, tiny pores in the media seal off through surface tension, forcing fuel to be drawn from other areas of the mat where fuel continues to be available. A HydraMat also acts as a 15 micron pre-filter eliminating the need for a separate filter before the fuel pump.

    • Patent pending design that solves the problems associated with traditional fuel pick-ups in stock fuel tanks as well as racing fuel cells
    • Perfect for vehicles experiencing fuel starvation during hard cornering, acceleration, stopping, inclines, and low fuel conditions
    • Surface tension and fluid wicking allow the HydraMat to continue to draw fuel from the tank or cell even when part of the mat uncovered
    • Unique internal reservoir assists in keeping fuel available at the pickup even under extreme fuel slosh conditions
    • Eliminates the need for specialty reservoirs, sumps and pick up pumps saving cost and greatly reducing complexity
    • Can be folded and compressed for easy installation through a variety of fuel cell openings
    • Works with Alcohol, Ethanol, Methanol, and E-85 fuels, and 2-cycle oil blends as high as 20:1

    Not for use with most oils (see previous point for exceptions). Not for use with diesel fuels. Learn More


  • Fuel Safe's Corvette Pro Cell bladder

    Corvette Fuel Cell, SA107A

    Fuel Safe's Corvette Pro Cell bladder is designed to fit perfectly into your factory tank. Stock mounting hardware is used to simplify re-installation. The cell comes complete with an FIA-FT3 approved Pro Cell bladder and an SF6X10E fill plate that includes a -8 pickup, a -8 vent with rollover protection and a -8 return fitting. A sending unit can be added to the cell to provide fuel level information to the driver.

    *PLEASE NOTE: This cell requires that you send in your factory can for bladder installation.

    Learn More

Grid  List 

2 Item(s)

per page